Proaim 14ft Video DSLR Camera Jib Stand with Jr pan Tilt Head

Fully featured and innovatively designed Proaim 14ft video camera crane let the shooters to create silky smooth shots in just one go. Proaim 14ft Ribbed DSLR camera jib with Intersection joint assembly allows quick and secure connection. Robust and light weight tripod stand accommodate heavy duty camera jib crane with stability. Remote control operated pan tilt head allow 360 degree panning and tilting operations.

The kit also has some complimentary items to make your purchase best buy. Adding production value with unrestricted shot selection is lot easier now with Proaim 14ft camera crane, Jib Stand, Jr pan Tilt Head all in one package.

Discover new perspectives by unrestricted exciting angles!

"WHAT YOU SEE IS WHAT YOU GET"

FEATURES

-  High quality camera crane perfect for any demanding angle.
-  Fully adjustable metal wire system for superior stability.
-  Tilting movements can be achieved with the control handle.
-  Uses home style exercise weights with a one inch mounting hole.
-  Fixed camera angle when controlling handle 'pin locked.
-  Quick, Flexible & dynamic champion for all locations.
-  2 axis motorized Head with high torque motors.
-  360 degree panning and tilting to capture numerous angles.
-  Consistent run speed even at slowest setting.
-  Stable, Non slip feet Tripod stand.
-  Portable and easy to carry.
-  100% Satisfaction Guarantee.

HIGH CAPACITY CAMERA BASE PLATFORM High-capacity Camera Base platform is built to exacting standards for a remarkably stable point. It allows direct camera mounting on jib. Superior design set this base platform apart from others.

MACHINED INTERSECTING JOINTS FOR QUICK AND SECURE ASSEMBLY Intersection joint assembly allows for quick and secure connection. A solid stainless steel thumbscrew assures a tight and secure fit from above and below the camera crane arm.

CENTRAL FORK WITH THRUST ROLLER BEARINGS TO HOUSE HEAVY AXIAL LOADS AND SHOCK LOADS The fork provide you a maximum stability, smooth movements , up and down jerk free action shots as well as left and right sleek style shots. Thrust needle roller bearings are fitted with a form-stable cage to reliably guide and keep many needle rollers. These bearings provide a high degree of stiffness within a minimum axial space. These bearings enable to house heavy axial loads and shock loads.

LOCKING PINS FOR STABLE OR MOVING SHOTS High strength SS locking pin is used at the pivot point, and is attached by lanyard to prevent them from ever being lost. - The control handle can be unlocked by releasing the locking pin to get moving shots. - You can achieve fixed camera angles when controlling handle is pin locked.

CABLES AND COUPLINGS Our modular cable system boosts camera crane stability and rigidity. The superior-quality cable tensioning system keeps the 14ft camera crane taut, rock solid and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime.

LCD MOUNTING PROVISION The LCD Mounting Arm for LCD Monitor comes with this camera boom.

WEIGHT - CLOSERS (INCLUDED) Stronger Hi-tensile weight closers help to achieve perfect balance.

PROAIM JR. PAN TILT HEAD

Uniquely designed for DV, HDV and broadcast cameras weighing upto 6kg /13.2lbs or less. Our Motorized Proaim Junior Pan-Tilt head offers 360 degree endless panning and tilting movements with reversal points.
- Runs on 12V DC power produced by the included A/C adapter or also accepts external 12V DC battery power through the included 3mtr long 4 pin XLR cable for outdoor shooting.
- You receive the Pan-Tilt Head with assembled wiring for Top and Bottom Motor.
- To install Power out to head (4 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.

JOYSTICK CONTROL

- The Joystick control system includes a 7.5 mtr. long operating cable and AC adapter.
- Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm.

Smooth, accurate, proportional joystick control for outstanding footages

Mounting 3-Axis Gimbals is Possible!

Flycam Quick Release Mount
for Ronin/M/MX/R2 & MōVI (M5/M10/M15) (Optional)

Enables panning and tilting the camera remotely

The Supportive accessories are for demonstration purpose only.

CAMERA JIB STAND

-  Made of Aluminum Black anodized
-   Base spread - 32"- 48"
-  Height adjustment - 44"- 80"
-  Completely collapsed height - 46"
-  Outer Dia of top part of Stand - 50mm
-  Makes the camera jib arm stable & solid as a rock
-  Safety Pin for Secure Pole
-  Weight capacity of the stand is 200lbs (90kg)

• Proaim 14ft Video DSLR Camera Jib
• LCD Monitor Arm
• Proaim Jr. Pan Tilt Head with Joystick Box
• Universal Adapter
• AC Adapter
• Cable with Connector
• FREE Proaim Lanc Zoom Controller (P-ZC-3DV)
• Complimentary Proaim Power Pack
• Storage Bag