Proaim™ 9FT Camera Jib with Jr. Pan-Tilt Head, Stand and 12V Power Pack

To add dramatic and remarkable impact to your footages, PROAIM comes forward with its Lightweight, Versatile 9ft camera crane video production package that allows you to smoothly move your camera up and down and in indefinite number of 360 degree arcs. The aluminium constructed, ribbed section jib crane makes it surprisingly strong and robust.

Unique Swivel System allows smooth slides & avoids disturbing swings during movement. Exclusively designed to fit in tight spaces or be raised up for taller ceilings, getting you amazing overhead shots. There is lot more in the crane jib package, a rugged tripod stand that acts as a supporter for your steady shots, a durable pan-tilt head to capture every creative angle, and power bank for continuous power supply.

"WHAT YOU SEE IS WHAT YOU GET

FEATURES

- Solid CNC machined Aluminum constructed jib arm for high durability.
- Tilting movements achieved with the control handle
- Double Arm Section for maximum stability and minimum wobble
- Camera Jib crane comes complete with own jib stand - very useful as no expensive sturdy tripod is needed!
- Stronger weight bar to easily achieve counter balance
- Uses standard household style exercise weights. (1 inch hole).
- Breaks down into two small easily transported sections
- Quick, Flexible & dynamic champion for all locations
- Portable and very easy to carry
- 2 axis motorized Head with high torque motors.
- 360 degree panning and tilting to capture numerous angles.
- Non-slip feet
- Fully controllable Pan Tilt to capture numerous angles
- 2 gear design for easy 360 degree operation
- Performance engineered with two 12 volt motors
- Supports cameras up to 10 pounds
- Consistent run speed even at slowest setting
- Power Pack for continuous power supply.
- Stable, Non slip feet Tripod stand.
- Portable and easy to carry.
- 100% Satisfaction Guarantee.

HIGH CAPACITY CAMERA BASE PLATFORM High-capacity Camera Base platform is built to exacting standards for a remarkably stable point. It allows direct camera mounting on jib. Superior design set this base platform apart from others.

RIBBED SECTION CAMERA CRANE ARM BODY FOR HIGH STRENGTH Ribbed sections makes the jib arm stronger & durable. It supports cameras up to 15lbs without pan tilt Head and 10lbs when using with pan tilt head. The cable-tensioned design of the Proaim 9ft camera crane allows it to reach farther and higher while maintaining stability

LOCKING PINS FOR STABLE OR MOVING SHOTS High strength SS locking pin is used at the pivot point, and is connected properly to prevent from ever being lost. - The control handle can be unlocked by releasing the locking pin to get moving shots. - You can achieve fixed camera angles when controlling handle is pin locked.

LCD MOUNTING PROVISION 2 The LCD Mounting Arm for LCD Monitor comes with this camera boom.

WEIGHT-CLOSERS (INCLUDED) Stronger Hi-tensile weight closers help to achieve perfect balance.

PROAIM JR. PAN AND TILT HEAD

Uniquely designed for DV, HDV and broadcast cameras weighing upto 6kg /13.2lbs or less. Our Mot orized Proaim Junior Pan-Tilt head offers 360 degree endless panning and tilting movements with reversal points.
-Runs on 12V DC power produced by the included A/C adapter or also accepts external 12V DC battery power through the   included 3mtr long 4 pin XLR cable for outdoor shooting.
-You receive the Pan-Tilt Head with assembled wiring for Top and Bottom Motor.
-To install Power out to head (4 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.

JOYSTICK CONTROLLER

- The Joystick control system includes a 7.5 mtr. long operating cable and AC adapter.
- Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm.

Smooth, accurate, proportional joystick control for outstanding footages

Superb Proportional Control

- Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves.
- Joystick is touch sensitive:
Small movement – less speed,
More movement – more speed.

Mounting 3-Axis Gimbals is Possible!

Flycam Quick Release Mount
for Ronin/M/MX/R2 & MōVI (M5/M10/M15) (Optional)

Sophisticated system to perform smooth camera movement

The Supportive accessories are for demonstration purpose only.

CAMERA JIB STAND

-  Made of Aluminum Black anodized
-   Base spread - 32"- 48"
-  Height adjustment - 44"- 80"
-  Completely collapsed height - 46"
-  Outer Dia of top part of Stand - 50mm
-  Makes the camera jib arm stable & solid as a rock
-  Safety Pin for Secure Pole
-  Weight capacity of the stand is 200lbs (90kg)

• Proaim 9ft Camera Jib with Jib Stand
• Proaim Jr. Pan Tilt Head
• Joystick control
• LCD Monitor Arm
• FREE Proaim Lanc Zoom Controller (P-ZC-3DV)
• Power Pack
• Storage Bag