Is the Flycam Galaxy Arm & Vest with Redking Video Camera Stabilizer is suitable for a Blackmagic Ursa Mini 4K camera ?

The stabilizer of Flycam Galaxy Arm & Vest with Redking Video Camera Stabilizer has the load capacity of 800gms- 7Kg. So if the weight of your camera setup is around 7 Kgs then it can easily be mounted on the stabilizer.

Hi, I have an Flycam Galaxy at home. I only have one Red spring. Is it possible to buy one red spring at your company? I hope to hear from you soon. Kind regards, Fabian Bemener

We do not sell only one Red spring. We only sell red springs in pairs i.e. a set of two red springs.

Can this be used with the Steadicam Aero 30 arm? It has a 1/2" connecting pin. If not, is there an connecting pin adapter to use that fits the flycam on the Steadicam Aero 30 arm?

The Redking stabilizer is compatible with a 5/8" (16mm) connecting pin. It is not compatible with the Steadicam Aero 30 arm, which uses a 1/2" pin. Currently, we do not offer an adapter to connect the Flycam system to the Steadicam Aero 30 arm.

Would this unit work with a Sony A7sii?

Yes, the Flycam Galaxy Arm & Vest with Redking Stabilizer supports the Sony A7S II camera.

Can this be reversed for low to ground shots?

Yes, the system can be easily reconfigured to achieve low-angle and near-ground shots, making it ideal for creative camera movements.

Works with a Nikon D3400?

Yes, the Flycam Galaxy Arm & Vest with Redking Stabilizer is compatible with the Nikon D3400 and can be properly balanced for smooth, stable shots.

Will this unit work with a Cannon 70D along with a zoom lens of 18-400mm attached?

A Canon 70D with the 18-400mm is about 4-5 lbs. The FLYCAM Galaxy Arm and Vest Kit with Redking Camera Stabilizer and its Camera Stabilizer, 15.4 lb Maximum Load will have no trouble handling the payload.

would this unit handle a Panasonic AG-CX350 ok? The camera weighs in at 4.19lbs.

Yes it will.

Would this unit work with a Sony FDR AX700 ? It weighs in around 3.0lbs.

Yes, this will work.

Will this setup work with a BMPCC 5k setup?

Yes, it will work with the BMPCC 5k setup.

Can this be used with a Canon 80d?

Yes, it can be used.

What is the length of centre column when collapsed? I need to know for taking apart for travel.

The center post is just under 21" at its shortest length.

Does this flycam have a video on and off switch?

It does not.

Is it possible to mount a motorized gimbal onto the Flycam Redking Handheld Camera Stabilizer?

Yes, you can mount any handheld motorized gimbal with Flycam Redking Handheld Camera Stabilizer.

I am looking for a way to connect my flycam galaxy vest to DJI Ronin RSC2 gimbal.

You can attach the Flycam Galaxy arm and vest to DJI Ronin RSC2 gimbal with the help of Flycam Gimbal Adapter, below is the link for the same.

Flycam Gimbal Adapter -- https://proaim.be/products/flycam-arm-vest-gimbal-adapter"

What are the minimum and maximum chest and waist sizes the vest will fit?

The Vest will fit to the sizes as follows :
Minimum Chest Size : 38 inches
Minimum Waist Size : 28 inches
Maximum Chest Size : 52 inches
Maximum Waist Size : 60 inches

Do the vest and arm help with stabilization?

Yes it does help, however the most important part of stabilization is first balancing the flycam initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the correct balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.

What is the shipping weight of this kit? it does not include table champ? thanks!

The shipping weight is around 23lbs or 11kg. It does not come with a table clamp.

Does this Stabilizer come with the counterweight?

Yes, this Stabilizer comes with counter weight plates i.e. 8 weights for each side.

Does it come with a protector bag?

Yes, this Flycam Redking includes the foam packaging with bag.

What's the maximum weight capacity?

This Flycam Redking can take the cameras weighing upto - 7 kg/15.4 lbs.

How long can I use the Stabilizer before I get tired? Do I need the Arm & Vest with this?

This Flycam Redking camera Stabilizer weighs only 3.2kgs and so can be holded easily for long time but for more comfort you can use it with Arm Support and Body vest. Following are the options for it :
i) Galaxy Arm & Vest - Flycam Galaxy Stabilizer Arm & Vest
ii) Vista-II Arm and Vest - Flycam Vista-II Stabilizing Arm & Vest

Is it returnable for a full refund if it doesn’t meet my expectations upon delivery?

Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 30 days and you get a 100% refund.

Can i put larger cameras or just a dslr?

Yes, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 10kg(21lbs). We provide two springs with the Galaxy Arm, Blue marked spring is for 2-5kg and the Red marked spring is for 5-10kgs. It does take considerable time and practice to learn to Fly but the vest and arm will help with fatigue and getting steady shots. The build quality is surprisingly good.

Does the Flycam Stabilizer comes with the vest?

Yes, It comes with an Arm and Vest.

Will this work with a glidecam 4000 and hd series?

Yes, it will perfectly work with your glidecam stabilizer.

What is the diameter of the main shaft?

The main shaft (spool adapter) has the diameter of 16mm. We provide two bushes to add onto it to make it easily adaptable to the stabilizers with the handle's inner diameter of 19mm and 22mm.

Does the vest have a carrying case too?

No, The vest doesn't come in a carry case.

Is it compatible with the arm and vest?

Yes it is compatible with the Arm & Vest. There are two options for Arm & vest for this camera stabilizer i.e.
i) Galaxy Arm & Vest - Flycam Galaxy Stabilizer Arm & Vest
ii) Vista-II Arm and Vest - Flycam Vista-II Stabilizing Arm & Vest

Can I mount LCD Monitor with Flycam Redking?

Yes, you can mount the LCD monitor onto the weight plate of Flycam Redking. You need to remove the weights from one side to which you want to mount the LCD monitor.

If my camera plus accessories are overweight, what options do I have? Can I add more counter weights?

Flycam Redking can bear upto 15.4lbs. You can add more counter weights for total weight upto 17lbs only.

What is the weight of Flycam Redking?

The weight of Flycam Redking with weight plate is approx. 3.2 kg

I have a miller tripod, is the plate of redking compatible?

The plate of Redking is manfrotto 501 compatible and so it will be used with any tripod having the same compatibility.

What is the warranty?

We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.