We make Moviemaking Affordable We make Moviemaking Affordable
My CartUS $0
PROAIM Exclusive Offer  -  Flat 5% off on all orders  -  Promo Code : PROAIM5

Product was successfully added to your shopping cart.

Flycam Galaxy Stabilizer Arm & Vest with HD-3000 Steadycam System


Availability: In stock

Regular Price: US $711

Special Price US $502

Regular Price: US $711

Special Price US $502

United Kingdom Italy France Spain Germany
  1. Easy to use and balance
    review by Stella.T

    The arm maintains its neutral position really well, the vest is comfortable, and the bottom line is it works. If you violently shake the system, you will feel very minor rattle. I think, most of the rattle is in the main bearing that rotates around the column. Again, this has not affected shooting. It is not as light as you might think. The action is smooth to me. This stabilizer balanced nicely in 20 mins the first time, with two small weights and the leg all the way up, with a T3i and Sigma 17-55. It has plenty of room to grow to use a heavier body and lens. Now that I have a sense of what to look for, I can balance it within a couple minutes.

  2. I can’t begin to tell you how this Stabilization is so perfect!
    review by Nathaniel

    I can’t begin to tell you how this Stabilization is so perfect! I really needed something like this for smoother images and cleaner transitions. The vest is comfortable, after a while you don’t even notice it’s on, and the springs are silent. I could easily make it up and down stairs with this on without getting a camera shake or any kind of feedback off the device, and didn’t need any help setting it all up.

  3. Perfect purchase!
    review by Alessandro

    I had purchased this for a short film documentary in slum area and had a pretty fun time using it. I used this in conjunction with a Sony Fs100 camera (about 7lbs with the lens) and found it was just a little too heavy for my wrists to handle, so get a brace if needed! The vest is awesome, I have to admit. I'm a 5'5, 222lbs man, so short but sturdy, and the vest really helped me run around with this thing all day. This stabilization is really very a good solution for the smooth video results.

  4. Great experience
    review by Arwa Debaja

    The product is good, and what is important is the team inside the company. They were cooperative, precise, everything went on time and they had full knowledge of what they are selling and what is the best product for your needs.

Write Your Review

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating

-  Construction : Aluminum

STABILIZER Specifications
-  Weighing capacity of stabilizer : 3.5kg / 8lb
-  Camera Plate : 1/4"-20 & 3/8"-16 mounting holes
-  Head Plate Dimensions : 7.5 x 4.2 inches
-  Gimbal : CNC machined Double bearing
-  Counter-weight disks : 16pcs
-  Steadycam weight : 2.86 kg/6.3lb

ARM Specifications
-  Weighing capacity of Arm : 10kg/22lb
-  We provide two types of springs:
    - Blue Spring : 1-5kg / 2.2-11lb
    - Red Spring : 5-10kg / 11-22lb
-  Stabilizer Arm weight : 2.3 kg/5lb

VEST Specifications
-  Stabilizer Vest weight : 2.1 kg/5lb
-  Waist size : 28" to 60"

-  Camera mounting screws : 1/4"-20 & 3/8"-16

- Flycam HD-3000 Handheld Stabilizer (Revised on 25-Dec-2017)
- Flycam Galaxy Stabilizer Arm and Vest
- FREE Unico Quick Release
- FREE Flycam Table Clamp
- Storage bag


Q : What are the minimum and maximum chest and waist sizes the vest will fit ?
Ans : The Vest will fit to the sizes as follows :
Minimum Chest Size : 38 inches
Minimum Waist Size : 28 inches

Maximum Chest Size : 52 inches
Maximum Waist Size : 60 inches

Q : Can i put larger cameras or just a dslr ?
Ans : Yes, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 10kg(21lbs). We provide two springs with the Galaxy Arm, Blue marked spring is for 1-5kg and the Red marked spring is for 5-10kgs. It does take considerable time and practice to learn to Fly but the vest and arm will help with fatigue and getting steady shots. The build quality is surprisingly good.

Q : Do the vest and arm help with stabilization?
Ans : Yes it does help, however the most important part of stabilization is first balancing the flycam initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the correct balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.

Q : Does the Flycam Stabilizer comes with the vest ?
Ans : No, It comes with an Arm and Vest only. The Flycam stabilizer is ‘NOT INCLUDED’ in this kit.

Q : Will this work with a glidecam 4000 and hd series?
An : Yes, it will perfectly work with your glidecam stabilizer.

Q : What is the shipping weight of this kit? it does not include table champ? thanks!
Ans : The shipping weight is around 23lbs or 11kg. It does not come with a table clamp.

Q : What is the diameter of the main shaft?
Ans : The main shaft (spool adapter) has the diameter of 16mm. We provide two bushes to add onto it to make it easily adaptable to the stabilizers with the handle’s inner diameter of 19mm and 22mm.

Q : Does the vest have a carrying case too?
Ans : No, The vest doesn’t come in a carry case.

Q. Does this steadicam come with the counterweight?
Ans : Yes, this steadicam comes with counter weight plates i.e. 8 weights for each side.

Q. Is it compatible with the arm and vest?
Ans : Yes it is compatible with the Arm & Vest. There are two options for Arm & vest for this camera stabilizer i.e.
i) Comfort Arm & Vest :
ii) Galaxy Arm & Vest :

Q. Does it come with a protector bag?
Ans : Yes, this Flycam HD-3000 includes the foam packaging with bag.

Q. Can I mount LCD Monitor with HD-3000?
Ans : Yes, you can mount the LCD monitor onto the weight plate of Flycam HD-3000. You need to remove the weights from one side to which you want to mount the LCD monitor.

Q. Where can i get assembly instructions?
Ans : We provide the electronic link for instruction manual. Here is the link for reference :

Q. What's the maximum weight capacity?
Ans : This Flycam HD-3000 can take the cameras weighing upto - 3.5kg / 8lbs.

Q. Will the flycam hd-3000 handheld video stabilizer work with a glidecam arm brace or do I have to purchase the flycam arm brace?
Ans : Yes, the Flycam HD-3000 Stabilizer will work with glidecam arm brace.

Q . If my camera plus accessories are overweight, what options do I have? Can I add more counter weights?
Ans : HD-3000 can bear upto 8lbs. You can add more counter weights for total weight upto 9lbs only. If the weight of your setup is more than 9lbs, we suggest you to purchase Flycam HD-5000 for perfect balance as it can bear weight upto 11lbs.

Q . How long can I use the steadicam before I get tired? Do I need the Arm & Vest with this?
Ans : This Flycam HD-3000 camera steadycam weighs only 2.7kgs and so can be holded easily for long time but for more comfort you can use it with Arm Support and Body vest. Following are the options for it :
i) Arm Brace -
ii) Body Pod -
iii) Comfort Arm & Vest -
iv) Galaxy Arm & Vest -

Q . What is the difference between the HD-3000 and Flycam 3000?
Ans : The key difference in both the models is the design. The HD-3000 has micro balancing feature as compared to Flycam 3000. The HD-3000 includes Unico Quick release plate and Table clamp as free accessories, where as Flycam 3000 includes Unico Quick release plate and Flycam Yoko as free accessories.

Q . What is the weight of HD-3000?
Ans : The weight of HD-3000 with weight plate is approx. 2.7 kg

Q . I can’t get my HD-3000 to balance with my camera. Help!
Ans : Here is the link for User manual of HD-3000 steadycam :

Please refer to page no. 6-9 for balancing tips of Flycam HD-3000 camera steadycam. Once you achieve the perfect balance, you will love to keep shooting with it.

Q: Is it returnable for a full refund if it doesn’t meet my expectations upon delivery?
Ans : Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 14 days and you get a 100% refund.

Q : What is the warranty?
Ans : We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.