- Construction : CNC machined aluminum
- Total Length : 3ft
- Travelling Distance : 2ft 7inch
- Camera Mounting:1/4"-20
- Tripod Mounting :1/4"-20 & 3/8"-16
- Load Capacity of 4010 slider : 5 kg/11 lb
- Load Capacity with motion control system : 4kg
- Height from ground : 8 cm
- 2ft Maximum Speed : 9 sec
- 2ft Minimum Speed : 1 min 48 sec
- Load Capacity : 4kg
- 3ft Maximum Speed : 15 sec
- 3ft Minimum Speed : 1min 92 sec
- Load Capacity : 4kg
- Motor Power : 12v DC/30 RPM
- Geared Motor (Made in Taiwan) 30RPM 12V
DC INPUT :
- Battery Input Power : 7.2v-12v DC
- Adapter Input Power : 7.2v-12v DC
- Battery Backup : 1h+
- Output Power : 12v DC
- On/Off Switch : Yes
- Mode Option : Press at a time dual button to speed 0
- Mode One : Normal
- Mode Two : Move Right & Left Auto
- Mode Three-Four : Timeless
- Filmcity 3ft Power Video Camera Slider
- Filmcity Plus Motion Control system (FC-PL-MC)
- Battery & Charger
- Foam Packing
Q: Which camera will it work with?
Ans: It will work with all cameras as per weighing capacity according to the specific length of the slider.
Q: Does it come in carry case?
Ans: The complete components of this cage are packed in a foam packing box for safe storage. It doesn’t include bag.
Q: Will the 4ft slider work on single tripod or do I need two tripods?
Ans: The Filmcity 4ft slider can be mounted on single as well as two tripods. In case you want to use only one tripod, you can mount it at the center of the sliding base or else use two tripods at both ends. We recommend using two tripods for 4ft length.
Q: What are the bearings used? Does it create sound during sliding?
Ans: This slider has 4 high-end sealed bearings that allow smooth movement without any sound.
Q: Does it come with lock for sliding?
Ans: Yes, this slider comes with strong carriage brake to lock the carriage in any place on the rails for static shots.
Q: What is the center distance between the rails.
Ans: The center distance between the rails is 40mm.
Q: What is the diameter of rails?
Ans: The diameter of the rails is 10mm.
Q: What is the voltage of the motor?
Ans: The voltage is 12V.
Q: Which motor is used in this slider?
Ans:The motor used is 12V geared motor.
Q: How long is the cable comes with motion control system?
Ans: We provide 3meter long cable with this motion control system.
Q: Are the legs adjustable? What is the material of legs feet?
Ans: Yes, the legs are adjustable and you can easily use it on uneven surface. The legs feet are made of rubber.
Q: What is the height from ground?
Ans: The height from ground is 8cm.
Q: Does it include battery for motion control system?
Ans: No it doesn’t include battery. You can purchase 7V or 12V battery for using it in motion system.
Q: Will it mount on two tripods?
Ans: Yes it will mount on two tripods if you are using heavier camera.
Q: Will manfrotto head mount on this slider?
Ans: The camera mounting plate of this slider comes with 1/4"-20 and 3/8"-16 screw so if the mounting thread on manfrotto head are of these sizes, then it would fit.
Q: Can the length of the slider be increased?
Ans: No, the length of the slider cannot be extended.
Q: What is the travel distance of the slider?
Ans: The travel distance of Filmcity Power Video Camera Slider 3ft : 2.7ft
Q: Can it be used at floor and uneven surface.
Ans: Yes, you can use this slider on floor as well as on uneven surface. The adjustable legs allows you to use it on uneven surfaces.
Q: Can I use fluid head on this slider?
Ans: This slider comes with a standard1/4”-20 screw & 3/8"-16 stud on the carriage to mount any standard flat base ball-head or fluid head.
Q: Can I use 75mm bowl fluid head on it?
Ans: No, you cannot use the bowl fluid heads with this slider.
Q: Does it come fully assembled in its packing and is ready to use?
Ans: No, you have to mount the mount the motor, cable and controller and you are set to go.
Q : Is it returnable for a full refund if it doesn’t meet my expectations upon delivery?
Ans : Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 14 days and you get a 100% refund.
Q : What is the warranty?
Ans : We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.